<----SKIPPED LINES---->




    'SUCCESS: Handshake with servo Arduino received',
    3, 'Hemisphere connected', True)
GPIO_ERROR_ARDUINO_REMOTE_CONNECTION = (
    25,
    'ERROR: Remote not running or lost connection',
    'SUCCESS: Handshake with remote Arduino received',
    4, 'Remote connected', True)
GPIO_ERROR_BATTERY_CHARGE = (
    26,
    'ERROR: Remote battery is low',
    'SUCCESS: Remote battery recharged',
    5, 'Remote charged', False)
GPIO_FAN = (
    5,
    'ERROR: RPi above %dC degrees' % TEMP_FAN_TURN_ON_CELSIUS,
    'SUCCESS: RPi below %dC degrees' % TEMP_FAN_TURN_OFF_CELSIUS,
    7, 'Thermal condition', False)

# for future expansion
GPIO_UNUSED_1 = (
    27, 'Undefined condition set to true', 'Undefined condition set to false', 6, False)



GPIO_UNUSED_2 = (
    6, 'Undefined condition set to true', 'Undefined condition set to false', 8, False)




# GPIO pushbutton connections - (GPIO pin switch in; GPIO pin LED out)
GPIO_SOFT_RESET = (20, 21)

#if running on raspberry, then need to prepend path to file names
if RASPBERRY_PI:
  PICKLE_FLIGHTS = MESSAGEBOARD_PATH + PICKLE_FLIGHTS
  PICKLE_DASHBOARD = MESSAGEBOARD_PATH + PICKLE_DASHBOARD
  LOGFILE = MESSAGEBOARD_PATH + LOGFILE
  PICKLE_DUMP_JSON_FILE = MESSAGEBOARD_PATH + PICKLE_DUMP_JSON_FILE
  PICKLE_FA_JSON_FILE = MESSAGEBOARD_PATH + PICKLE_FA_JSON_FILE
  CODE_REPOSITORY = MESSAGEBOARD_PATH

  HISTOGRAM_CONFIG_FILE = WEBSERVER_PATH + HISTOGRAM_CONFIG_FILE
  CONFIG_FILE = WEBSERVER_PATH + CONFIG_FILE
  ROLLING_MESSAGE_FILE = WEBSERVER_PATH + ROLLING_MESSAGE_FILE
  ALL_MESSAGE_FILE = WEBSERVER_PATH + ALL_MESSAGE_FILE
  ROLLING_LOGFILE = WEBSERVER_PATH + ROLLING_LOGFILE
  STDERR_FILE = WEBSERVER_PATH + STDERR_FILE
  BACKUP_FILE = WEBSERVER_PATH + BACKUP_FILE




                            <----SKIPPED LINES---->

                            <----SKIPPED LINES---->




    'SUCCESS: Handshake with servo Arduino received',
    3, 'Hemisphere connected', True)
GPIO_ERROR_ARDUINO_REMOTE_CONNECTION = (
    25,
    'ERROR: Remote not running or lost connection',
    'SUCCESS: Handshake with remote Arduino received',
    4, 'Remote connected', True)
GPIO_ERROR_BATTERY_CHARGE = (
    26,
    'ERROR: Remote battery is low',
    'SUCCESS: Remote battery recharged',
    5, 'Remote charged', False)
GPIO_FAN = (
    5,
    'ERROR: RPi above %dC degrees' % TEMP_FAN_TURN_ON_CELSIUS,
    'SUCCESS: RPi below %dC degrees' % TEMP_FAN_TURN_OFF_CELSIUS,
    7, 'Thermal condition', False)

# for future expansion
GPIO_UNUSED_1 = (
    27,
    'Undefined condition set to true',
    'Undefined condition set to false',
    6, 'Unused', False)
GPIO_UNUSED_2 = (
    6,
    'Undefined condition set to true',
    'Undefined condition set to false',
    8, 'Unused', False)

# GPIO pushbutton connections - (GPIO pin switch in; GPIO pin LED out)
GPIO_SOFT_RESET = (20, 21)

#if running on raspberry, then need to prepend path to file names
if RASPBERRY_PI:
  PICKLE_FLIGHTS = MESSAGEBOARD_PATH + PICKLE_FLIGHTS
  PICKLE_DASHBOARD = MESSAGEBOARD_PATH + PICKLE_DASHBOARD
  LOGFILE = MESSAGEBOARD_PATH + LOGFILE
  PICKLE_DUMP_JSON_FILE = MESSAGEBOARD_PATH + PICKLE_DUMP_JSON_FILE
  PICKLE_FA_JSON_FILE = MESSAGEBOARD_PATH + PICKLE_FA_JSON_FILE
  CODE_REPOSITORY = MESSAGEBOARD_PATH

  HISTOGRAM_CONFIG_FILE = WEBSERVER_PATH + HISTOGRAM_CONFIG_FILE
  CONFIG_FILE = WEBSERVER_PATH + CONFIG_FILE
  ROLLING_MESSAGE_FILE = WEBSERVER_PATH + ROLLING_MESSAGE_FILE
  ALL_MESSAGE_FILE = WEBSERVER_PATH + ALL_MESSAGE_FILE
  ROLLING_LOGFILE = WEBSERVER_PATH + ROLLING_LOGFILE
  STDERR_FILE = WEBSERVER_PATH + STDERR_FILE
  BACKUP_FILE = WEBSERVER_PATH + BACKUP_FILE




                            <----SKIPPED LINES---->