<----SKIPPED LINES---->




SERVO_SIMULATED_OUT = 'servo_out.txt'
REMOTE_SIMULATED_IN = 'remote_in.txt'
REMOTE_SIMULATED_OUT = 'remote_out.txt'

if RASPBERRY_PI:
  ARDUINO_LOG = MESSAGEBOARD_PATH + ARDUINO_LOG
  SERIALS_LOG = MESSAGEBOARD_PATH + SERIALS_LOG
  SERVO_SIMULATED_OUT = MESSAGEBOARD_PATH + SERVO_SIMULATED_OUT
  SERVO_SIMULATED_IN = MESSAGEBOARD_PATH + SERVO_SIMULATED_IN
  REMOTE_SIMULATED_OUT = MESSAGEBOARD_PATH + REMOTE_SIMULATED_OUT
  REMOTE_SIMULATED_IN = MESSAGEBOARD_PATH + REMOTE_SIMULATED_IN

  ARDUINO_ROLLING_LOG = WEBSERVER_PATH + ARDUINO_ROLLING_LOG

CONNECTION_FLAG_BLUETOOTH = 1
CONNECTION_FLAG_USB = 2
CONNECTION_FLAG_SIMULATED = 3
RASPBERRY_PI = psutil.sys.platform.title() == 'Linux'

SN_SERVO = '5583834303435111C1A0'
SERVO_CONNECTION = (CONNECTION_FLAG_BLUETOOTH, (2, '98:D3:11:FC:42:16', 1))


SN_REMOTE = '75835343130351802272'
# directly connected to Serial2
# REMOTE_CONNECTION = (CONNECTION_FLAG_BLUETOOTH, (1, '98:D3:91:FD:B1:8F', 1))
# connected thru MOSFET to Serial1
REMOTE_CONNECTION = (CONNECTION_FLAG_BLUETOOTH, (1, '98:D3:91:FD:B3:C9', 1))

MIN_ALTITUDE = 5  # below this elevation degrees, turn off the tracking

if SIMULATE_ARDUINO:
  SERVO_CONNECTION = (CONNECTION_FLAG_SIMULATED, (SERVO_SIMULATED_IN, SERVO_SIMULATED_OUT))
  REMOTE_CONNECTION = (
      CONNECTION_FLAG_SIMULATED, (REMOTE_SIMULATED_IN, REMOTE_SIMULATED_OUT))

KEY_NOT_PRESENT_STRING = 'N/A'

DISP_LAST_FLIGHT_NUMB_ORIG_DEST = 0
DISP_LAST_FLIGHT_AZIMUTH_ELEVATION = 1
DISP_FLIGHT_COUNT_LAST_SEEN = 2
DISP_RADIO_RANGE = 3
DISPLAY_MODE_NAMES = [
    'LAST_FLIGHT_NUMB_ORIG_DEST', 'LAST_FLIGHT_AZIMUTH_ELEVATION',
    'FLIGHT_COUNT_LAST_SEEN', 'RADIO_RANGE']





                            <----SKIPPED LINES---->

                            <----SKIPPED LINES---->




SERVO_SIMULATED_OUT = 'servo_out.txt'
REMOTE_SIMULATED_IN = 'remote_in.txt'
REMOTE_SIMULATED_OUT = 'remote_out.txt'

if RASPBERRY_PI:
  ARDUINO_LOG = MESSAGEBOARD_PATH + ARDUINO_LOG
  SERIALS_LOG = MESSAGEBOARD_PATH + SERIALS_LOG
  SERVO_SIMULATED_OUT = MESSAGEBOARD_PATH + SERVO_SIMULATED_OUT
  SERVO_SIMULATED_IN = MESSAGEBOARD_PATH + SERVO_SIMULATED_IN
  REMOTE_SIMULATED_OUT = MESSAGEBOARD_PATH + REMOTE_SIMULATED_OUT
  REMOTE_SIMULATED_IN = MESSAGEBOARD_PATH + REMOTE_SIMULATED_IN

  ARDUINO_ROLLING_LOG = WEBSERVER_PATH + ARDUINO_ROLLING_LOG

CONNECTION_FLAG_BLUETOOTH = 1
CONNECTION_FLAG_USB = 2
CONNECTION_FLAG_SIMULATED = 3
RASPBERRY_PI = psutil.sys.platform.title() == 'Linux'

SN_SERVO = '5583834303435111C1A0'
SERVO_CONNECTION = (CONNECTION_FLAG_BLUETOOTH, (2, '98:D3:11:FC:42:16', 1))  # with MOSFET
SERVO_CONNECTION = (CONNECTION_FLAG_BLUETOOTH, (3, '98:D3:91:FD:B1:8F', 1))  # no MOSFET

SN_REMOTE = '75835343130351802272'
# directly connected to Serial2

# connected thru MOSFET to Serial1
REMOTE_CONNECTION = (CONNECTION_FLAG_BLUETOOTH, (1, '98:D3:91:FD:B3:C9', 1))

MIN_ALTITUDE = 5  # below this elevation degrees, turn off the tracking

if SIMULATE_ARDUINO:
  SERVO_CONNECTION = (CONNECTION_FLAG_SIMULATED, (SERVO_SIMULATED_IN, SERVO_SIMULATED_OUT))
  REMOTE_CONNECTION = (
      CONNECTION_FLAG_SIMULATED, (REMOTE_SIMULATED_IN, REMOTE_SIMULATED_OUT))

KEY_NOT_PRESENT_STRING = 'N/A'

DISP_LAST_FLIGHT_NUMB_ORIG_DEST = 0
DISP_LAST_FLIGHT_AZIMUTH_ELEVATION = 1
DISP_FLIGHT_COUNT_LAST_SEEN = 2
DISP_RADIO_RANGE = 3
DISPLAY_MODE_NAMES = [
    'LAST_FLIGHT_NUMB_ORIG_DEST', 'LAST_FLIGHT_AZIMUTH_ELEVATION',
    'FLIGHT_COUNT_LAST_SEEN', 'RADIO_RANGE']





                            <----SKIPPED LINES---->